Spark plugs
-
-
W20EXU
This translates to better fuel efficiency and improved throttle response. Machine rolled threads prevent seizing or cross threading during installation and removal 100% pre-fired to assure the highest quality possible Purified alumina powder insulator provides exceptional strength and thermal conductivity Five rib insulator prevents flashover Copper-glass seal bonds center electrode and insulator for a gas-tight seal Shell Thread Size: 14mm Thread Pitch: 1.25mm Seat Type: Gasket Reach: 19mm ... -
WR7LTC
Nickel-plated rolled threads provide anti-seize and corrosion protection. Metal glass fused resistor gives maximum interference suppression. Angular, 5-rib insulator design prevents flashover. Shell Thread Size: 14mm Thread Pitch: 1.25mm Seat Type: Gasket Resistor Value: 6K Ohm Reach: 19mm (3/4″) Hex Size: 13/16″ (21mm) Terminal Type: Removable Nut Gap: .039″ (1.0mm) Center Electrode Material: Nickel Type: Standard Size: 2.5mm Projection: Projected Ground Elec... -
-
PK20TT
1.1mm platinum tipped center electrode and titanium-enhanced 1.1mm ground electrode Machine rolled threads prevent seizing or cross threading during installation and removal 100% pre-fired to assure the highest quality possible Purified alumina powder insulator provides exceptional strength and thermal conductivity Five rib insulator prevents flashover Copper-glass seal bonds center electrode and insulator for a gas-tight seal Shell Thread Size: 14mm Thread Pitch: 1.25mm Seat Type: Gasket Re... -
-
IZFR6K11
Fine wire iridium tipped center electrode and fine wire platinum tipped ground electrode ensures slow wear rate providing stable idle, superior anti fouling, improved fuel efficiency and lower emissions. Trivalent metal plating provides superior anti-corrosion and anti-seizing properties Corrugated ribs prevent flashover Pure alumina silicate ceramic insulator, provides superior strength and better heat transfer Copper core aids in heat removal Triple seals prevent leakage Shell Threa... -
IZFR6K11S
Warranty: 12 Months
Torque Specs: Cast Iron: 11-18 lb. ft. Aluminum: 11-18 lb. ft.
Heat Range: 22
Longevity: 80-100k Miles
Resistor: Yes -
IZFR6K13
Warranty: 12 Months
Torque Specs: Cast Iron: 11-18 lb. ft. Aluminum: 11-18 lb. ft.
Heat Range: 22
Longevity: 80-100k Miles
Resistor: Yes -
-
YR7MPP33
Tapered, yttrium-enhanced ground electrode extend service life and improve access to air/fuel mixture. Nickel-plated rolled threads provide anti-seize and corrosion protection. Shell Thread Size: 12mm Thread Pitch: 1.25mm Seat Type: Gasket Resistor Value: 6K Ohm Reach: 26.5mm (1.04″) Hex Size: 5/8″ (16mm) Terminal Type: Solid Gap: .031″ (0.8mm) Center Electrode Material: Platinum Type: Fine Wire Size: 0.6mm Projection: Projected Ground Electrode Material: Platinum Ty... -
